• People Counting   ›
• People Counters   ›
• Directional Wireless Outdoor Beams

Directional Wireless Outdoor Beam Counters

Description

Traf-Sys Directional Wireless Outdoor Beams are a tamper-proof outdoor version of our Directional Wireless Beams. They are battery powered and transmit data over a wireless connection to the MIU-1000 data controller. Directional traffic detection enables these sensors to measure both inbound and outbound people counting statistics.

Features of Directional Wireless Outdoor Beams People Counters

• 3.6 volt Lithium battery power (1 to 2-year operation)
• Integrated 900 MHz wireless radio interface
• Up to 1300 ft radio range
• Covers up to 25 ft wide portals
• Unique serial number embedded in radio data packets
• Case designed for outdoor installation

Directional Wireless Outdoor Beams People Counter - Application

Traf-Sys People Counting Wireless Directional Infrared People Counters are ideal for environments where you are unable to reach a power outlet and need a simple to install solution. They can be installed in minutes and require very little training or expertise to install. The weatherproof enclosure makes these senors ideal for outdoor use.

Directional Wireless Outdoor Beams Customer Counter - Placement and Installation

Click for larger image.

Traf-Sys People Counting Wireless Directional Infrared People Counters are installed in entrances up to 25 feet wide and 36 to 52 inches from the ground. The beams should be installed in an area where the path of the beams is not likely to be obstructed by doors, reflective surfaces or other objects. When the beams are blocked by objects, they are unable to count. So, it is important to make sure the area where the beams will be installed is free from obstacles. Reflective surfaces such as glass and mirrors may cause interference with the infrared detection pattern. So, it is recommended to mount your infrared beams away from such surfaces.

The Directional Wireless Outdoor Beam Counters detection pattern consists of two beams. The order in which the beams are broken determines the direction of travel recorded. Because of this mechanic, only Front-Firing versions of the Directional Infrared Beam people counters are available. Therefore, it is recommended to mount these customer counting systems either on the inside of a door frame (see image) or with a mounting bracket that will allow you to attach the sensor to the wall. Mounting brackets are available upon request.