Data Controllers Manuals

Data Controller Instruction and Installation Manuals

Need help setting up a data controller? Select the controller you have from the tabs below to download an instruction manual.

MIU-1000
MIU-1000 Data Controller

MIU-1000

The Traf-Sys MIU-1000 is a stand-alone device designed to process and log data from wireless Traf-Sys sensors. The MIU-1000 receives radio transmitted data from sensors, processes the data and makes the data available via a command/response interface or XML delivery over the web.

  • A new MIU-1000 manual featuring instructions for use with the new MIU-1000 Config program.

  • MIU-1000 XML Programmers GuideThis zip file contains documentation for using the xml publishing feature of the mIU-1000.

  • This manual contains the command dictionary for programming and communicating with the MIU-1000. Perfect for users who want to create their own custom solutions.

MIU-1500
MIU-1000 Data Controller

MIU-1500

The Traf-Sys MIU-1500 is a stand-alone data controller that can be used without software. It can collect data from wirless sensors and make the data available over your network. The buit-in web interface will allow you to analyze your data directly from the MIU-1500, or you can export the data in .csv format to analyze in your own database.

  • This manual will guide you through setup and use of the Traf-Sys MIU-1500 data controller device.

  • This application allows you to locate your MIU-1500 on your network.

MIU-4
MIU-4

MIU-4

The Traf-Sys MIU-4 data controller is a stand-alone device designed to process and log data from wired Traf-Sys sensors. The MIU-4 receives contact-closure relay signals from sensors, processes the data and makes the data available via a command/response interface through the built-in serial data port.

  • This manual will guide you through the setup and use of the MIU-4 data controller device.

MIU-8
MIU-8

MIU-8

The Traf-Sys MIU-8 data controller is a stand-alone device designed to process and log data from wired Traf-Sys sensors. The MIU-8 receives contact-closure relay signals from sensors, processes the data and makes the data available via a command/response interface through the built-in serial data port.

  • MIU-8 User GuideThis manual will guide you through the configuration and use of the MIU-8 data controller.

MIU-40
MIU-40

MIU-40

The Traf-Sys MIU-40 data controller is a stand-alone device designed to process and log data from wired Traf-Sys sensors. The MIU-40 receives contact-closure relay signals from sensors, processes the data and makes the data available via a command/response interface through the built-in serial data port.

  • This manual will guide you through the setup and use of the MIU-40 data controller device.

[/tab_content]